head	1.15;
access;
symbols
	RELENG_8_4:1.15.0.2
	RELENG_9_1_0_RELEASE:1.13.2.1.4.2
	RELENG_9_1:1.13.2.1.0.4
	RELENG_9_1_BP:1.13.2.1
	RELENG_8_3_0_RELEASE:1.6.2.2.4.1
	RELENG_8_3:1.6.2.2.0.4
	RELENG_8_3_BP:1.6.2.2
	RELENG_9_0_0_RELEASE:1.13.2.1.2.1
	RELENG_9_0:1.13.2.1.0.2
	RELENG_9_0_BP:1.13.2.1
	RELENG_9:1.13.0.2
	RELENG_9_BP:1.13
	RELENG_8_2_0_RELEASE:1.6.2.2.2.1
	RELENG_8_2:1.6.2.2.0.2
	RELENG_8_2_BP:1.6.2.2
	RELENG_8_1_0_RELEASE:1.6.2.1.4.1
	RELENG_8_1:1.6.2.1.0.4
	RELENG_8_1_BP:1.6.2.1
	RELENG_8_0_0_RELEASE:1.6.2.1.2.1
	RELENG_8_0:1.6.2.1.0.2
	RELENG_8_0_BP:1.6.2.1
	RELENG_8:1.6.0.2
	RELENG_8_BP:1.6;
locks; strict;
comment	@# @;


1.15
date	2012.11.17.01.52.48;	author svnexp;	state Exp;
branches
	1.15.2.1;
next	1.14;

1.14
date	2012.03.12.21.25.32;	author jmallett;	state Exp;
branches;
next	1.13;

1.13
date	2011.05.11.00.52.41;	author gonzo;	state Exp;
branches
	1.13.2.1;
next	1.12;

1.12
date	2011.04.24.08.58.58;	author mav;	state Exp;
branches;
next	1.11;

1.11
date	2010.11.13.22.34.12;	author imp;	state Exp;
branches;
next	1.10;

1.10
date	2010.02.20.06.39.14;	author neel;	state Exp;
branches;
next	1.9;

1.9
date	2010.02.15.23.44.48;	author attilio;	state Exp;
branches;
next	1.8;

1.8
date	2010.02.10.16.30.04;	author attilio;	state Exp;
branches;
next	1.7;

1.7
date	2010.01.10.20.03.16;	author imp;	state Exp;
branches;
next	1.6;

1.6
date	2009.05.10.00.00.25;	author kuriyama;	state Exp;
branches
	1.6.2.1;
next	1.5;

1.5
date	2008.10.23.02.16.38;	author marcel;	state Exp;
branches;
next	1.4;

1.4
date	2008.09.03.18.40.29;	author obrien;	state Exp;
branches;
next	1.3;

1.3
date	2008.04.21.10.09.54;	author phk;	state Exp;
branches;
next	1.2;

1.2
date	2008.04.13.22.04.56;	author imp;	state Exp;
branches;
next	1.1;

1.1
date	2008.04.13.07.07.57;	author imp;	state Exp;
branches;
next	;

1.15.2.1
date	2012.11.17.01.52.48;	author svnexp;	state dead;
branches;
next	1.15.2.2;

1.15.2.2
date	2013.03.28.13.05.15;	author svnexp;	state Exp;
branches;
next	;

1.13.2.1
date	2011.09.23.00.51.37;	author kensmith;	state Exp;
branches
	1.13.2.1.2.1
	1.13.2.1.4.1;
next	1.13.2.2;

1.13.2.2
date	2012.11.17.11.37.15;	author svnexp;	state Exp;
branches;
next	;

1.13.2.1.2.1
date	2011.11.11.04.20.22;	author kensmith;	state Exp;
branches;
next	1.13.2.1.2.2;

1.13.2.1.2.2
date	2012.11.17.08.37.11;	author svnexp;	state Exp;
branches;
next	;

1.13.2.1.4.1
date	2012.08.05.23.54.33;	author kensmith;	state Exp;
branches;
next	1.13.2.1.4.2;

1.13.2.1.4.2
date	2012.11.17.08.48.02;	author svnexp;	state Exp;
branches;
next	;

1.6.2.1
date	2009.08.03.08.13.06;	author kensmith;	state Exp;
branches
	1.6.2.1.2.1
	1.6.2.1.4.1;
next	1.6.2.2;

1.6.2.2
date	2010.11.27.12.26.40;	author jchandra;	state Exp;
branches
	1.6.2.2.2.1
	1.6.2.2.4.1;
next	1.6.2.3;

1.6.2.3
date	2012.11.17.10.36.54;	author svnexp;	state Exp;
branches;
next	;

1.6.2.1.2.1
date	2009.10.25.01.10.29;	author kensmith;	state Exp;
branches;
next	;

1.6.2.1.4.1
date	2010.06.14.02.09.06;	author kensmith;	state Exp;
branches;
next	;

1.6.2.2.2.1
date	2010.12.21.17.09.25;	author kensmith;	state Exp;
branches;
next	;

1.6.2.2.4.1
date	2012.03.03.06.15.13;	author kensmith;	state Exp;
branches;
next	1.6.2.2.4.2;

1.6.2.2.4.2
date	2012.11.17.08.25.31;	author svnexp;	state Exp;
branches;
next	;


desc
@@


1.15
log
@Switching exporter and resync
@
text
@# MALTA -- Kernel config for MALTA boards
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
#    http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files. 
# If you are in doubt as to the purpose or necessity of a line, check first 
# in NOTES.
#
# $FreeBSD: head/sys/mips/conf/MALTA 232896 2012-03-12 21:25:32Z jmallett $

ident		MALTA

machine		mips mipsel	# Malta supports both, so it isn't in std.malta

makeoptions	KERNLOADADDR=0x80100000

options 	YAMON

# Don't build any modules yet.
makeoptions	MODULES_OVERRIDE=""

options 	TICK_USE_YAMON_FREQ=defined
#options 	TICK_USE_MALTA_RTC=defined

include		"../malta/std.malta"

hints		"MALTA.hints"		#Default places to look for devices.

makeoptions	DEBUG=-g		#Build kernel with gdb(1) debug symbols

options 	DDB
options 	KDB

options 	SCHED_4BSD		#4BSD scheduler
options 	INET			#InterNETworking
options 	NFSCL			#Network Filesystem Client
options 	NFS_ROOT		#NFS usable as /, requires NFSCL
options 	PSEUDOFS		#Pseudo-filesystem framework
options 	_KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions

options 	FFS			#Berkeley Fast Filesystem
options 	SOFTUPDATES		#Enable FFS soft updates support
options 	UFS_ACL			#Support for access control lists
options 	UFS_DIRHASH		#Improve performance on big directories
options 	ROOTDEVNAME=\"ufs:ada0s1a\"


# Debugging for use in -current
#options 	DEADLKRES		#Enable the deadlock resolver
options 	INVARIANTS		#Enable calls of extra sanity checking
options 	INVARIANT_SUPPORT	#Extra sanity checks of internal structures, required by INVARIANTS
#options 	WITNESS			#Enable checks to detect deadlocks and cycles
#options 	WITNESS_SKIPSPIN	#Don't run witness on spinlocks for speed

device		loop
device		ether
device		le
device		miibus
device		md
device		uart
@


1.15.2.1
log
@file MALTA was added on branch RELENG_8_4 on 2013-03-28 13:05:15 +0000
@
text
@d1 69
@


1.15.2.2
log
@## SVN ## Exported commit - http://svnweb.freebsd.org/changeset/base/248810
## SVN ## CVS IS DEPRECATED: http://wiki.freebsd.org/CvsIsDeprecated
@
text
@a0 70
# MALTA -- Kernel config for MALTA boards
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
#    http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files. 
# If you are in doubt as to the purpose or necessity of a line, check first 
# in NOTES.
#
# $FreeBSD: releng/8.4/sys/mips/conf/MALTA 215938 2010-11-27 12:26:40Z jchandra $

ident		MALTA

#makeoptions	ARCH_FLAGS=-march=mips32
makeoptions	MIPS_LITTLE_ENDIAN=defined
makeoptions	KERNLOADADDR=0x80100000

options 	YAMON

# Don't build any modules yet.
makeoptions	MODULES_OVERRIDE=""

options 	TICK_USE_YAMON_FREQ=defined
#options 	TICK_USE_MALTA_RTC=defined

include		"../malta/std.malta"

options		ISA_MIPS32

hints		"MALTA.hints"		#Default places to look for devices.

makeoptions	DEBUG=-g		#Build kernel with gdb(1) debug symbols

options 	DDB
options 	KDB

options 	SCHED_4BSD		#4BSD scheduler
options 	INET			#InterNETworking
options 	NFSCLIENT		#Network Filesystem Client
options 	NFS_ROOT		#NFS usable as /, requires NFSCLIENT
options 	PSEUDOFS		#Pseudo-filesystem framework
options 	_KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions

options 	FFS			#Berkeley Fast Filesystem
options 	SOFTUPDATES		#Enable FFS soft updates support
options 	UFS_ACL			#Support for access control lists
options 	UFS_DIRHASH		#Improve performance on big directories
options 	ROOTDEVNAME=\"ufs:ad0s1a\"


# Debugging for use in -current
options 	INVARIANTS		#Enable calls of extra sanity checking
options 	INVARIANT_SUPPORT	#Extra sanity checks of internal structures, required by INVARIANTS
#options 	WITNESS			#Enable checks to detect deadlocks and cycles
#options 	WITNESS_SKIPSPIN	#Don't run witness on spinlocks for speed

device		loop
device		ether
device		le
device		miibus
device		md
device		uart
@


1.14
log
@SVN rev 232896 on 2012-03-12 21:25:32Z by jmallett

o) Use ABI, not ISA_* options, to determine whether to compile bits if libkern
   required for the ABI the kernel is being built for.
   XXX This is implemented in a kind-of nasty way that involves including source
       files, but it's still an improvement.
o) Retire ISA_* options since they're unused and were always wrong.
@
text
@d18 1
a18 1
# $FreeBSD$
@


1.13
log
@SVN rev 221753 on 2011-05-11 00:52:41Z by gonzo

Use new option names for NFS client and NFS server

See UPDATING entry for 20110427
@
text
@a35 2
options		ISA_MIPS32

@


1.13.2.1
log
@SVN rev 225736 on 2011-09-23 00:51:37Z by kensmith

Copy head to stable/9 as part of 9.0-RELEASE release cycle.

Approved by:	re (implicit)
@
text
@@


1.13.2.2
log
@## SVN ##
## SVN ## Exported commit - http://svnweb.freebsd.org/changeset/base/ 242902
## SVN ## CVS IS DEPRECATED: http://wiki.freebsd.org/CvsIsDeprecated
## SVN ##
## SVN ## ------------------------------------------------------------------------
## SVN ## r242902 | dteske | 2012-11-11 23:29:45 +0000 (Sun, 11 Nov 2012) | 10 lines
## SVN ##
## SVN ## Fix a regression introduced by SVN r211417 that saw the breakage of a feature
## SVN ## documented in usr.sbin/sysinstall/help/shortcuts.hlp (reproduced below):
## SVN ##
## SVN ## If /usr/sbin/sysinstall is linked to another filename, say
## SVN ## `/usr/local/bin/configPackages', then the basename will be used
## SVN ## as an implicit command name.
## SVN ##
## SVN ## Reviewed by:	adrian (co-mentor)
## SVN ## Approved by:	adrian (co-mentor)
## SVN ##
## SVN ## ------------------------------------------------------------------------
## SVN ##
@
text
@d18 1
a18 1
# $FreeBSD: stable/9/sys/mips/conf/MALTA 221753 2011-05-11 00:52:41Z gonzo $
@


1.13.2.1.4.1
log
@SVN rev 239080 on 2012-08-05 23:54:33Z by kensmith

Copy stable/9 to releng/9.1 as part of the 9.1-RELEASE release process.

Approved by:	re (implicit)
@
text
@@


1.13.2.1.4.2
log
@Switch importer
@
text
@d18 1
a18 1
# $FreeBSD: releng/9.1/sys/mips/conf/MALTA 221753 2011-05-11 00:52:41Z gonzo $
@


1.13.2.1.2.1
log
@SVN rev 227445 on 2011-11-11 04:20:22Z by kensmith

Copy stable/9 to releng/9.0 as part of the FreeBSD 9.0-RELEASE release
cycle.

Approved by:	re (implicit)
@
text
@@


1.13.2.1.2.2
log
@Switch importer
@
text
@d18 1
a18 1
# $FreeBSD: releng/9.0/sys/mips/conf/MALTA 221753 2011-05-11 00:52:41Z gonzo $
@


1.12
log
@SVN rev 220982 on 2011-04-24 08:58:58Z by mav

Switch the GENERIC kernels for all architectures to the new CAM-based ATA
stack. It means that all legacy ATA drivers are disabled and replaced by
respective CAM drivers. If you are using ATA device names in /etc/fstab or
other places, make sure to update them respectively (adX -> adaY,
acdX -> cdY, afdX -> daY, astX -> saY, where 'Y's are the sequential
numbers for each type in order of detection, unless configured otherwise
with tunables, see cam(4)).

ataraid(4) functionality is now supported by the RAID GEOM class.
To use it you can load geom_raid kernel module and use graid(8) tool
for management. Instead of /dev/arX device names, use /dev/raid/rX.
@
text
@d47 2
a48 2
options 	NFSCLIENT		#Network Filesystem Client
options 	NFS_ROOT		#NFS usable as /, requires NFSCLIENT
@


1.11
log
@SVN rev 215270 on 2010-11-13 22:34:12Z by imp

Remove the 'machine mips' from DEFAULTS.  Put the proper 'machine mips
mipsel' or 'machine mips mipseb' into the config file (with a few 64's
tossed in for good measure).  This will let us build the proper
kernels with different worlds as part of make universe.
@
text
@d56 1
a56 1
options 	ROOTDEVNAME=\"ufs:ad0s1a\"
@


1.10
log
@SVN rev 204108 on 2010-02-20 06:39:14Z by neel

Get rid of unused options: KERNPHYSADDR, KERNVIRTADDR, PHYSADDR, PHYS_ADDR_64BIT

Discussed with: gonzo, imp
@
text
@d22 2
a23 2
#makeoptions	ARCH_FLAGS=-march=mips32
makeoptions	MIPS_LITTLE_ENDIAN=defined
@


1.9
log
@SVN rev 203938 on 2010-02-15 23:44:48Z by attilio

Adjust style (following the already existing rules) for the newly
introduced option DEADLKRES.

Reported by:	danfe, julian, avg
@
text
@a30 1
options 	KERNVIRTADDR=0x80100000
@


1.8
log
@SVN rev 203758 on 2010-02-10 16:30:04Z by attilio

Add the options DEADLKRES (introducing the deadlock resolver thread) in
the 'debugging' section of any HEAD kernel and enable for the mainstream
ones, excluding the embedded architectures.
It may, of course, enabled on a case-by-case basis.

Sponsored by:	Sandvine Incorporated
Requested by:	emaste
Discussed with:	kib
@
text
@d61 1
a61 1
#options	DEADLKRES		#Enable the deadlock resolver
@


1.7
log
@SVN rev 202034 on 2010-01-10 20:03:16Z by imp

Merge from projects/mips to head by hand:

I think these are the relevant changes, but definitely are a superset
of them.  Software archaeologists are invited to check the branch
itself for the details.

r199695 | imp | 2009-11-23 00:49:50 -0700 (Mon, 23 Nov 2009) | 2 lines
Specify loader script and load address

r198263 | neel | 2009-10-19 22:31:20 -0600 (Mon, 19 Oct 2009) | 7 lines
The default KERNLOADADDR does not work on MALTA hardware. On my platform the
"First free SDRAM address" reported by YAMON is 0x800b6e61.
So use a conservative KERNLOADADDR of 0x80100000.
Approved by: imp (mentor)

r194163 | imp | 2009-06-14 00:12:21 -0600 (Sun, 14 Jun 2009) | 2 lines
Kludge: pretend to be ISA_MIPS32 for the moment.

r192864 | gonzo | 2009-05-26 16:40:12 -0600 (Tue, 26 May 2009) | 4 lines
- Replace CPU_NOFPU and SOFTFLOAT options with CPU_FPU. By default
   we assume that there is no FPU, because majority of SoC does
   not have it.

r187461 | gonzo | 2009-01-19 21:24:03 -0700 (Mon, 19 Jan 2009) | 3 lines
- KERNLOADADDR should be defined with makeoption.
    Redboot loads kernel now

r187418 | gonzo | 2009-01-18 19:37:10 -0700 (Sun, 18 Jan 2009) | 4 lines
- Add trampoline stuff for bootloaders that do not support ELF
- Replace arm'ish KERNPHYSADDR/KERNVIRTADDR with
    KERNLOADADDR/TRAMPLOADADDR and clean configs
@
text
@d61 1
@


1.6
log
@SVN rev 191954 on 2009-05-10 00:00:25Z by kuriyama

- Use "device\t" and "options \t" for consistency.
@
text
@d24 1
d37 2
@


1.6.2.1
log
@SVN rev 196045 on 2009-08-03 08:13:06Z by kensmith

Copy head to stable/8 as part of 8.0 Release cycle.

Approved by:	re (Implicit)
@
text
@@


1.6.2.2
log
@SVN rev 215938 on 2010-11-27 12:26:40Z by jchandra

Merge MIPS platform support to 8-STABLE.

This commit merges the MIPS platform changes that was now stable in
-CURRENT into 8-STABLE. The MIPS changesets are too many (~400) to list
here. But the changesets merged in this commit that affect other platforms
are summarized below:

r204635 : (changes to sys/dev/hwpmc, lib/libpmc, sys/sys/pmc.h)
Add support for hwpmc(4) on the MIPS 24K, 32 bit, embedded processor.

r205845: (changes to sys/modules/Makefile)
Fix for building modules on mips and arm.

r204031: (changes to sys/kern/link_elf_obj.c)
printf fix, as part of kernel module support for MIPS.

r206404: (changes to sys/arm/include/bus.h)
Add BUS_SPACE_UNRESTRICTED and define it to be ~0, just like all the
other platforms - for arm and mips.

r206819: (changes to sys/vm/)
Add VMFS_TLB_ALIGNED_SPACE option and kmem_alloc_nofault_space(), which
is used to allocate kernel stack address on MIPS.

r208165, r211087: (sys/kern/subr_smp.c, sys/kern/sched_ule.c)
Enable ULE scheduler for MIPS, Fix for an issue in SMP when 32 cpus are
enabled.

r208659: (sys/{ia64/ia64,mips/mips,sun4v/sun4v}/pmap.c)
Simplify the inner loop of get_pv_entry()

r208794: (changes to sys/vm/)
Make vm_contig_grow_cache() extern, and use it when vm_phys_alloc_contig()
fails to allocate MIPS page table pages.

r210327:  (changes to sys/vm/)
Support for MIPS page table page allocation.  Add a new function 'vm_page_t
vm_page_alloc_freelist(int flind, int order, int req)' to vm/vm_page.c to
allocate a page from a specified freelist, and other related changes.

Reviewed by:	alc(vm changes only)
Approved by:	kib(re), alc(vm), imp(mips), jmallett(mips), gnn(mips pmc)
@
text
@a23 1
makeoptions	KERNLOADADDR=0x80100000
d30 1
a35 2
options		ISA_MIPS32

@


1.6.2.3
log
@## SVN ##
## SVN ## Exported commit - http://svnweb.freebsd.org/changeset/base/ 242909
## SVN ## CVS IS DEPRECATED: http://wiki.freebsd.org/CvsIsDeprecated
## SVN ##
## SVN ## ------------------------------------------------------------------------
## SVN ## r242909 | dim | 2012-11-12 07:47:19 +0000 (Mon, 12 Nov 2012) | 20 lines
## SVN ##
## SVN ## MFC r242625:
## SVN ##
## SVN ## Remove duplicate const specifiers in many drivers (I hope I got all of
## SVN ## them, please let me know if not).  Most of these are of the form:
## SVN ##
## SVN ## static const struct bzzt_type {
## SVN ##       [...list of members...]
## SVN ## } const bzzt_devs[] = {
## SVN ##       [...list of initializers...]
## SVN ## };
## SVN ##
## SVN ## The second const is unnecessary, as arrays cannot be modified anyway,
## SVN ## and if the elements are const, the whole thing is const automatically
## SVN ## (e.g. it is placed in .rodata).
## SVN ##
## SVN ## I have verified this does not change the binary output of a full kernel
## SVN ## build (except for build timestamps embedded in the object files).
## SVN ##
## SVN ## Reviewed by:	yongari, marius
## SVN ##
## SVN ## ------------------------------------------------------------------------
## SVN ##
@
text
@d18 1
a18 1
# $FreeBSD: stable/8/sys/mips/conf/MALTA 215938 2010-11-27 12:26:40Z jchandra $
@


1.6.2.2.4.1
log
@SVN rev 232438 on 2012-03-03 06:15:13Z by kensmith

Copy stable/8 to releng/8.3 as part of 8.3-RELEASE release cycle.

Approved by:	re (implicit)
@
text
@@


1.6.2.2.4.2
log
@Switch importer
@
text
@d18 1
a18 1
# $FreeBSD: releng/8.3/sys/mips/conf/MALTA 215938 2010-11-27 12:26:40Z jchandra $
@


1.6.2.2.2.1
log
@SVN rev 216617 on 2010-12-21 17:09:25Z by kensmith

Copy stable/8 to releng/8.2 in preparation for FreeBSD-8.2 release.

Approved by:	re (implicit)
@
text
@@


1.6.2.1.4.1
log
@SVN rev 209145 on 2010-06-14 02:09:06Z by kensmith

Copy stable/8 to releng/8.1 in preparation for 8.1-RC1.

Approved by:	re (implicit)
@
text
@@


1.6.2.1.2.1
log
@SVN rev 198460 on 2009-10-25 01:10:29Z by kensmith

Copy stable/8 to releng/8.0 as part of 8.0-RELEASE release procedure.

Approved by:	re (implicit)
@
text
@@


1.5
log
@SVN rev 184194 on 2008-10-23 02:16:38Z by marcel

Add mips/conf/DEFAULTS and populate it with:
        machine arm
        device  mem
	device  uart_ns8250
        options GEOM_BSD
        options GEOM_MBR

Remove the first three from all kernel configuration files
(sometimes commented-out) and change geom_bsd and geom_mbr
from standard to optional.
@
text
@d25 1
a25 1
options		YAMON
d30 3
a32 3
options		KERNVIRTADDR=0x80100000
options		TICK_USE_YAMON_FREQ=defined
#options		TICK_USE_MALTA_RTC=defined
d40 2
a41 2
options		DDB
options		KDB
d43 12
a54 12
options		SCHED_4BSD		#4BSD scheduler
options		INET			#InterNETworking
options		NFSCLIENT		#Network Filesystem Client
options		NFS_ROOT		#NFS usable as /, requires NFSCLIENT
options		PSEUDOFS		#Pseudo-filesystem framework
options		_KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions

options         FFS                     #Berkeley Fast Filesystem
options         SOFTUPDATES             #Enable FFS soft updates support
options         UFS_ACL                 #Support for access control lists
options         UFS_DIRHASH             #Improve performance on big directories
options		ROOTDEVNAME=\"ufs:ad0s1a\"
d58 4
a61 4
options		INVARIANTS		#Enable calls of extra sanity checking
options		INVARIANT_SUPPORT	#Extra sanity checks of internal structures, required by INVARIANTS
#options		WITNESS			#Enable checks to detect deadlocks and cycles
#options		WITNESS_SKIPSPIN	#Don't run witness on spinlocks for speed
@


1.4
log
@SVN rev 182736 on 2008-09-03 18:40:29Z by obrien

Catch up with the move from mips32/.
@
text
@a19 1
machine		mips
a67 1
device		mem
a68 1
device		uart_ns8250
@


1.3
log
@Make genclock standard on all platforms.

Thanks to: grehan & marcel for platform support on ia64 and ppc.
@
text
@d35 1
a35 1
include		"../mips32/malta/std.malta"
@


1.2
log
@fix comments for these files.

Noticed by: stass
@
text
@a63 1
device		genclock
@


1.1
log
@FreeBSD/mips port.  The FreeBSD/mips port targets mips32, mips64,
mips32r2 and mips64r2 (and close relatives) processors.  There
presently is support for ADMtek ADM5120, A mips 4Kc in a malta board,
the RB533 routerboard (based on IDT RC32434) and some preliminary
support for sibtye/broadcom designs.  Other hardware support will be
forthcomcing.

This port boots multiuser under gxemul emulating the malta board and
also bootstraps on the hardware whose support is forthcoming...

Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard,
Randall Stewert and others that have contributed to the mips2 and/or
mips2-jnpr perforce branches.  Juniper contirbuted a generic mips port
late in the life cycle of the misp2 branch.  Warner Losh merged the
mips2 and Juniper code bases, and others list above have worked for
the past several months to get to multiuser.

In addition, the mips2 work owe a debt to the trail blazing efforts of
the original mips branch in perforce done by Juli Mallett.
@
text
@d1 1
a1 1
# QEMU -- Generic kernel configuration file for FreeBSD/mips
@

